Radio - Kenwood KMM-U21 Instruction Manual

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ;
NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even
when the unit is turned off. ; OFF: Cancels.

RADIO

Supported band: FM1/ FM2/ FM3/ AM/ SW1/ SW2
Search for a station
1 Press repeatedly to select TUNER.
2 Press repeatedly (or press
3 Press S / T (or press S /
• To change the searching method for S / T: Press
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one of the
number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM), "– – – –" (for AM/ SW1) or "– – – – –" (for SW2) appears on the display.
2 Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
canceled.
/ on RC-406) to select the band.
on RC-406) to search for a station.
repeatedly.
2
, Direct Access Tuning is automatically
5
ENGLISH