Dimm Module Combination; Installing Ddr Modules - MSI G52-M6570XA-G22 Hardware User Manual

MS-6570 ATX Mainboard

DIMM Module Combination

Install at least one DIMM module on the slots. You can install either
single- or double-sided modules in any order to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot
DIMM 1
(Bank 0 & 1)
DIMM 2
(Bank 2 & 3)
DIMM 3
(Bank 4 & 5)
Maximum System Memory Suppported

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The mod-
ule will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply in-
serted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
2-8
Memory Module
S/D
S/D
S/D
S: Single Side
Volt
Total Memory
64MB~1GB
64MB~1GB
64MB~1GB
64MB~3GB
D: Double Side
Notch