Setting Lock - Brother DCP-8110D Advanced User's Manual

Chapter 2
Changing to the Public mode
After a restricted user has finished using the
machine, it will return to the Public setting
within one minute.
You can exit from the restricted user mode by
pressing the following keys:
 Clear when you are in the copy mode.
 SCAN when you are in the scan mode.
Then LCD will ask you Go to Public?.
Press 1 to choose 1.Yes.
Note
If the function you want to use is restricted
for all users, Not Available will appear
on the LCD; The machine will go back to
the Ready mode, and you cannot access
the function you want to use. Contact your
administrator to check your Secure
Function Lock Settings.
10

Setting Lock

Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or Brother Customer Service.
While the Setting Lock is On, you cannot
change the settings without a password.
2