Table of Contents
Advertisement
Microwave
en
Setting MicroCombi
With some types of heating, it is possible to switch on
the microwave.
Suitable types of heating include:
< 4D hot air
■
% Top/bottom heating
■
7 Hot air grilling
■
( Grill, large area
■
* Grill, small area
■
The 90-watt, 180-watt and 360-watt microwave power
settings can be used with MicroCombi.
Before setting MicroCombi, observe the information
regarding suitable ovenware.
Touch the Menu field.
1.
The list of operating modes is displayed.
Touch the "MicroCombi" text field.
2.
Touch the text field for the required type of heating.
3.
Touch the text field for the required microwave
4.
power setting.
The temperature or level is highlighted in white in the
display.
Turn the rotary selector to set the temperature or
5.
level.
Touch the "Cooking time" text field.
6.
The cooking time is highlighted in white in the
display.
Turn the rotary selector to set the cooking time.
7.
Press the l Start/Stop button to start.
8.
The cooking time counts down in the display.
The appliance starts.
Once the cooking time has elapsed, an audible signal
sounds. The appliance finishes the operation. The
cooking time 00 m 00 s is shown in the display.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Changing and cancelling
After starting the appliance, the temperature remains
highlighted. When you move the rotary selector, the
temperature and/or level is changed and applied
immediately.
Change the cooking time by touching the "Cooking
time" text field and turning the rotary selector. The
change is applied immediately.
To change the type of heating or the microwave power
setting, use the l Start/Stop button beforehand to
pause the operation. Touch the text field for the type of
heating or the microwave power setting, and make the
adjustment.
When you change the type of heating or
Note:
microwave power setting, the other settings are also
reset.
If you want to cancel the MicroCombi operating mode,
use the l Start/Stop button to pause the operation and
select another operating mode.
20
Drying
Dry the cooking compartment after operation to ensure
that no moisture remains.
Starting drying
During drying, the cooking compartment is heated up
so that the moisture in the cooking compartment
evaporates. Then open the appliance door so that the
steam escapes.
Leave the appliance to cool down.
1.
Remove the worst dirt from the cooking
2.
compartment immediately and wipe away moisture
from the cooking compartment floor.
If necessary, press the # On/Off button to switch on
3.
the appliance.
Touch the menu field.
4.
The options for selecting an operating mode are
displayed.
Touch the "Drying" text field.
5.
The duration is displayed. It cannot be changed.
Press the l Start/Stop button to start.
6.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door and leave it open for 1 to 2
7.
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
Leave the appliance to cool down.
1.
Remove any dirt from the cooking compartment.
2.
Dry the cooking compartment with a soft cloth.
3.
Leave the appliance door open for one hour so that
4.
the cooking compartment dries completely.
Advertisement
Table of Contents
