Texture/Glossing Of Housing; Tilt And Swivel Base; Label; Product Dimension/Weight/ Weight - Philips 170CW8FB/00 Service Manual

82 HUDSON 8
Bezel and Rear cover to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg;
UL94-V0 is OK).
All major plastic parts (bezel, back cover) need to be molded from same resin.

5.9 Texture/Glossing of housing

The texture area and texture no should follow Philips specification.
The exterior surfaces shall have a uniform texture.
Philips must approve the mold texturing.
< = 20 gloss units

5.10 Tilt and swivel base

Tilt angle

5.11 Label

Regulatory label / Carton label should follow Philips requirement.
Detail document refer to Philips Engineering Reference Book.
5.12 Product dimension / Weight
Unit dimension
Packed unit dimension : (W) * (H) * (D) mm
Packed unit dimension (China carton):
Net weight
Gross weight

5.13 Transportation

Transportation standards refer to TYE-M0002.
5.13.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from
the supplier to the destination specified in the purchase order. All packaging materials are subject to test and
evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
5.13.2 Transportation Test
The overall test refer to TYE-M0002.
Vibration, drop test should be performed at ambient temperature(20°C to 23oC) and relative humidity (40% to
65% ).
A. Transportation test specification for all regions except China/India
•
Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
•
Un-package test
1. Half sine shock test (non operation)
B. Transportation test specification for China/India
•
Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
•
Un-package test
-5 ° max.(forward) and + 20° max.(backward )
:
: (W) * (H) * mm(D)
: (incl. accessory/cables; excl. cushion/carton)
: