Scanning Frequencies; Ambient Temperature: 0 °C - 35 °C; Electrical Characteristics; Interface Signals - Philips 170CW8FB/00 Service Manual

76 HUDSON 8

2.2 Scanning frequencies

Hor. : 30 – 83 K Hz
Ver.: 56 - 76 Hz
Video dot rate: <140 MHz
Power input: 90-264 V AC, 50/60 ± 2 Hz
Power consumption : < 37W ( typ.)
2.3 Ambient temperature:

3. Electrical characteristics

3.1 Interface signals

1). D-Sub Analog
Input signal : Video, Hsync., Vsync
Video : 0.7 Vp-p, input impedance, 75 ohm @DC
Sync. : Separate sync
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)

3.2 Interface

3.2.1 D-Sub Cable
Length
Fix with monitor when packing, with transplant pin protective cover.
Connector type
Blue connector thumb-operated jack screws
Pin assignment:
0 °C - 35 °C
TTL level , input impedance 2.2k ohm terminate
: 1.8 M +/- 50 mm
: D-Sub male with DDC2B pin assignments.
Pin No. Signal
1 Red
2 Green/ SOG
3 Blue
4 Sense (GND)
5 Cable Detect (GND)
6 Red GND
7 Green GND
8 Blue GND
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H/H+V sync
14 V-sync
15 Data clock
(Positive/Negative)