Download Print this page

Sanyo VM-EX410P Instruction Manual page 7

8mm

Advertisement

n
Battery
remaining
power indicator
The remaining charge of the battery is displayed in
the viewfinder.
When the remaining charge is low (c-=1)
it is
recommended
to have a spare recharged battery
pack ready.
When this indicator(m)
is displayed, the power
will run out in about
L
5 minutes or less.
--=2
n
Remaining tape display
When the remaining tape reaches about halfway
point during recording or playback, the indicator
@IL)
will be displayed.
IEl~Eil-
El0
--
1. Power mode button
When the power is turned on, the unit will
automatically
go into recording pause mode (if a
tape is loaded). A different
mode (PLAYER or
CAMERA) is selected every time this button is
pressed.
1.
Grip belt and lens cap
Use the grip belt to hold the camcorder.
K.
POWER/CHARGE
switch
The switch has three positions. Up (POWER
position) for recording and playback, down
(CHARGE position) for recharging the battery pack,
and centre or power off position.
L.
Battery compartment
cover open button
(PUSH)
Press on the PUSH button to open or close the
cover.
M.
Cassette eject button (EJECT)
6
English

Advertisement

loading

This manual is also suitable for:

Vm-ex580p