Advertisement
Condensation
Condensation
is the moisture that forms on the
outside of a glass when you fill it with cold water.
The first sign of condensation
is fogging
of the
camcorder lens and viewfinder.
To stop the formation
of condensation,
wrap the
camcorder in a cloth until the fogging
on the lens
and in the viewfinder
disappears.
Do not use the camcorder before condensation
has
disappeared as that may cause damage to the video
heads.
Conditions
where condensation
might appear
n
If the camcorder is suddenly moved from a cold
place to a warm, humid one, or vice versa.
n
If a heater has been turned on to quickly heat
the room, or if the level of humidity is high.
n
If taken from an air conditioned
room, or car to
a hot, humid place.
Condensation
warning
indicator
If condensation
is detected inside the camcorder,
the condensation
warning
indicator will flash in the
Viewfinder.
(See page 5.)
n
As condensation
may also appear inside the
cassette casing, the cassette warning
indicator
might also flash when the cassette is loaded.
Do not load a cassette in the camcorder if you
suspect that condensation
has formed inside the
cassette.
If condensation
has formed
Eject the cassette and wait for 1 - 2 hours for the
condensation
to dry.
The time required to completely
eliminate
condensation
may vary.
WARNING:
UNAUTHORIZED RECORDING OR USE OF
TELEVISION PROGRAMMING,
BROADCASTS,
VIDEO TAPE, FILM OR OTHER COPYRIGHTED
MATERIAL MAY VIOLATE APPLICABLE
COPYRIGHT LAWS. SANYO ASSUMES NO
RESPONSIBILITY FOR UNAUTHORIZED
DUPLICATION, USE OR OTHER ACTS WHICH
INFRINGE UPON THE RIGHTS OF COPYRIGHT
OWNERS.
4
English
Advertisement
