Sanyo VM-EX400P Service Manual

FILE NO.
SERVICE MANUAL
sq#'Y o
8 mm Camcorder
PAL
(VM-EX400P)
Contents
1. Disassembly ...................................................................... 2
2. Electrical ADJUSTMENT ................................................ 7
3. TROUBLESHOOTING GUIDE ..............................................26
DA OTC I [CT
,n, ,,u
L,ti#
ACCESSORIES AND CABINET ............................................34
VIEWFINDER ....................................................................... 38
MECHANISM ....................................................................... 40
ELECTRICAL PARTS ........................................................... 44
CIRCUIT DIAGRAM (Refer to the separate volume)
r
PRODUCT SAFETY NOTICE
7
The components designated by a symbol (~) in this schematic diagram designates
components whose value are of special significance to product safety. Should any
component designated by a symbol need to be replaced, use only the part designated in
the Parts List, Do not deviate from the resistance, wattage, and valtage ratings shown.
VM-EX400P
(U. K.)
(Europe)
(General Area)
(Australia)
VM-EX450P
(U.K.)
VM-EX480P
(U.K.)
VM-EX550P
(U.K.)
VM-EX560P
(U.K.)
(Europe)
Please see other materials with Reference No.
given in table below.
Supplement of RS
Mechanism MECHANISM MS550024
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.
NOTE :1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specifications are subject to change without notice.
ER22P/E, EX, GX, A ER221P/E, EDX ER231P/E, EDX, EX 12605500, 02,04, 05 05700, 01 05800,02, 03 REFERENCE No. SM550038