Kyocera CS-5035 Copystar Product Manual page 28

One of the most innovative strengths of the
new CS-5050, CS-4050 and CS-3050 is the
Scan and Send functionality that comes stan-
dard with the devices. This Scanning/Sending
functionality incorporates exceptional features
that will benefit virtually every customer's envi-
ronment, and Kyocera's optional KYOcapture
and iTag Document Management Solution can
meet the requirements of any customer inter-
ested in integrating an advanced Document
Workflow Solution for their business.
Standard Scan Specifications:
Scanner Type
• Color and Monochrome Scanner
• Multi Send Functionality
Interface
• 10/100BaseTX
Supported Protocol
• TCP/IP
Resolution (include Fax Resolutions)
• 200 x 100 dpi
• 200 x 200 dpi
• 200 x 400 dpi
• 300 x 300 dpi
• 400 x 400 dpi
• 600 x 600 dpi
Scan Speed
• 50 OPM - Monochrome
• 25 OPM - Color
File Format
• Monochrome - PDF, TIFF
• Color - PDF, JPG
Scanning Features/Functions
• Scan to e-Mail
• Standard LDAP on-board
• Scan to Folder via SMB
S C A N / S E N D
• No utility required
• Scan to FTP
• TWAIN (PC)
Driver
• TWAIN (PC)
Web Interface
• Kyocera Command Center
Color and Monochrome Scanning
Customers looking for a strong scanning solu-
tion for their workgroup or business environ-
ment will be very interested in the ability to
scan documents in color. The new CS-5050,
CS-4050 and CS-3050 will accommodate this
growing trend, incorporating a scanner that can
read color and monochrome images, enhanc-
ing the products capabilities, and allowing cus-
tomers to integrate their color color scanning
requirements with a monochrome output
device.
Scan speed (simplex) from the optional DP-700
Dual Scan Document Processor will be a very
productive 50 originals per minute (OPM) in
Monochrome mode, and 25 OPM in Color
mode. The DP-710 can hold up to 100 Letter-
size originals, maximizing productivity for scan-
ning applications.
Scanned files can be saved in one of three for-
mats, and can be selected from the Color TSI.
In Monochrome mode, files can be scanned as
PDF or TIFF files. In Color mode, scans can be
saved as PDF or JPG files. Resolution can be
selected from 200 to 600 dpi, depending on the
application and intended destination. For
archival, customers may wish to scan at 200
dpi, so file sizes are constrained.
P R O D U C T G U I D E
2 8