Kyocera CS-5035 Copystar Product Manual page 38

KM Network Fax Driver
The process of sending a document from the
desktop requires the KM Network Fax Driver,
which installs locally in the PC Printer Folder.
Users electing to PC Fax would access this
Fax Driver in the same manner as printing a
document, so training to use the
KM Network Fax Driver is kept at a minimum.
The KM Network Fax driver is fairly simple, giv-
ing the user control over the media size, page
direction and imaging mode details.
Once the command to PC Fax has been
selected using the "OK" button, the job spools
to the local queue and the Transmission
Control dialogue box appears. Transmission
Control is where all of the necessary TX set-
tings are selected.
Destination Addresses
Fax destinations are set once the Transmission
Control TX Settings appear. These addresses
can be set manually as needed.
Consolidated Address Book
The Consolidated Address Book located at the
device level is for Send Functionality, namely
Scan and Fax. The Consolidated Address Book
allows for businesses to store up to 2,000 des-
tinations with e-Mail destinations or Fax num-
bers. Combined with the standard LDAP for
Scan to e-Mail function, the CS-5050,
CS-4050 and CS-3050 provide a strong com-
petitive advantage for any workgroup.
Network Fax Reception
Transmitting faxes from the desktop isn't the
only consideration for Network Fax. A consider-
able amount of resources and savings can be
realized by utilizing Network reception.
Working in conjunction with the fax modem and
F A X / S E N D
and Single Board Architecture, network recep-
tion can be configured. The CS-5050, CS-4050
and CS-3050 will direct incoming faxes to the
appropriate folder. .
P R O D U C T G U I D E
3 8