Brewing Coffee; Cleaning The Coffeemaker Before First Use; Selecting And Measuring Ground Coffee; Adding Water And Ground Coffee - Mr. Coffee UNT83 User Manual

Brewing Coffee

Cleaning the Coffeemaker Before First Use

Follow the steps under "Adding Water and Ground Coffee" and "Brewing Coffee Now,"
(Pages 8-9) but do not add ground coffee.

Selecting and Measuring Ground Coffee

For best results, use coffee ground for use with automatic drip coffeemakers.
The amounts shown below are suggested amounts.
To Brew Use This Amount of Ground Coffee
8 cups 7 tablespoons or 3-1/2 scoops
6 cups 6 tablespoons or 3 scoops
4 cups 5 tablespoons or 2-1/2 scoops
2 cups 3 tablespoons or 1-1/2 scoops
• two level tablespoons = one level scoop
• one cup = five ounces brewed coffee

Adding Water and Ground Coffee

1) Open the brew basket lid and lift out the
removable filter insert.
Make sure to remove the cardboard
insert before first-time use.
2) Place a MR. COFFEE ® brand 8-12 cup
paper filter or a MR. COFFEE ® permanent
gold-tone filter in the removable
filter insert.
3) Add the desired amount of ground coffee
to the filter. Gently shake the filter insert
to level the ground coffee.
4) Return the filter insert to the brew basket.
Be certain that the filter is centered in the
filter insert. Close the lid to the brew basket.
Do not brew coffee while the brew
basket lid is open.
8
5) For Model UNT83: Open the reservoir lid and
fill the reservoir with cold water for the desired
cup level on the water window (up to 8 cups).
For Models UNT83, URT84, URT85, URT84, URT85,
URTX83, URTX84 and URTX85 only: Remove the
water reservoir by grasping the hand holds in the back
of the reservoir, and pulling up. Fill it with the desired
amount of cold water. Replace the reservoir on the
Coffeemaker, making sure that it is firmly attached to the
Coffeemaker body.
Make sure the reservoir is squarely centered
on the Coffeemaker or the water may
overflow. An overflow may cause personal
injury or damage to property.
Do not remove the water reservoir at any
time during the brewing cycle.
6) Place the empty thermal carafe on the base.
To achieve the best performance, rinse the thermal carafe
with warm water. This will improve the heat retaining
capabilities of the thermal carafe. While brewing, the
Brew-Thru lid must be on the thermal carafe and the
POUR arrow of the lid must be aligned with the spout.
Otherwise, the carafe may overflow.
Make sure the thermal carafe is squarely centered
on the base or the water and grounds will overflow
from the brew basket. An overflow may cause
personal injury or damage to property.
To reduce the risk of damaging the thermal carafe
and/or the risk of personal injury, do not add cold
water to the thermal carafe if the thermal carafe is
already hot.

Brewing Coffee Now

For Models UNT83, URT84, URT85, URTX83, URTX84 and
URTX85 only:
Press the BREW NOW button
The ON indicator will illuminate, indicating that the Coffeemaker
is on and the brew cycle will begin. When the coffee stops
flowing, the brew cycle is complete.
The Coffeemaker will turn off automatically. The indicator light
will go out to let you know the brew cycle is complete.
9