Table of Contents
Advertisement
5. Raise the seat and unscrew the rear fen-
der installation bolts until their threaded
portion is completely out. Reinsert those
bolts as stoppers while holding the rear
fender.
1.
Installation bolts
6. Remove the axle nut cotter pin and the
axle nut.
7.
Loosen the rear axle pinch bolt.
8.
While supporting the brake caliper, pull
out the rear axle.
' -
9. Hold up the brake caliper assembly and
place it on the hook o f the rear arm.
10. Move the wheel t o the right side t o
separate it from the final gear case and
remove the rear wheel.
NOTE:
Do not depress the brake pedal when
the wheel is off the machine so that
the caliper piston is not forced out
of the cylinder.
Hide quick links:
Advertisement
Table of Contents
