Table of contents
®
• Setting up your meter
NOTE: Before testing, read this
owner's booklet carefully.
iv
pg. 2
Check the code on the test
strip vial before inserting the
strip. Make sure the three
™
contact bars are facing you.
Push the strip in as far as it
will go. Do not bend the strip.
The meter will turn on, show
a start-up test screen, and
then a code number. The first
time you use the meter, the
screen will display "--"
instead of a number.
Match the code displayed
on the meter with the code
on the test strip vial
not match the code on the
vial, press ▲ or ▼ to change
the code. If the flashing blood
appears on the
display before you are ready,
remove the strip and re-start
The meter is ready for testing
when the flashing blood drop
icon
R
appears.
pg. 7