Recycled Water Connection; Hot Water Supply - Miele PW 6080 Vario Operating And Installation Instructions

Installation
Hot water connection
Connecting the machine to a hot water
supply will lead to low electrical
consumption during hot water
operation. The hot water temperature at
the water supply must not exceed
158°F (70°C).
The water in single water lines from the
hot water source cool faster when not in
constant use. To heat the wash water
more electricity must be used. The
same conditions for the hot water as for
the cold water connection will then
apply.
^ Connect the hot water intake hose
(red mark) to the water supply.
The connection of the machine to a
hot water line only, is not possible
for functional reasons.
If the machine is not installed for hot
water connection, the "Main wash
water" setting must be set accordingly
and the hot water inlet hose must be
detached:
^ Go to "Settings - Supervisor level -
Main wash water" and select the
"Cold" option.
54
The program times may be
extended.
^ Unscrew the hot water intake hose
(red mark).
^ Screw on the supplied stopper.

Recycled water connection

This machine can be connected to a
recycled water supply.
^ Unscrew the cap from the recycled
water valve.
^ Connect the additional inlet hose to
this valve.
The "main wash" and "rinses" water
settings must then be set as
appropriate.
^ Go to "Settings - Supervisor level"
menu and select the "Recycled
water" option.

Hot water supply

It is possible to connect the machine to
a hot water supply, 158°F (70°C) to a
maximum of 185°F (85°C). A special
inlet hose is required for this option.
The machine must also be
reprogrammed by a Miele authorized
service technician.