7.2. Replacing engine oil.
After engine has been run prior to changing the oil will
DO NOT allow any dust, dirt or any other debris enter oil or crankcase.
7.2.1. Loosen the Oil Filler Cap.
7.2.2. Remove the Oil Drain Plug and drain the old oil while the engine is still warm.
7.2.3. Fit new copper washer as required.
7.2.4. After draining, re-tighten the drain plug and refill with the recommended oil API CH-
4/CF/SJ/SL diesel engine oil or higher grade.
7.2.5. Clear up any spillages.
7.2.6. Tighten the Oil Filler Cap.
very hot. Wear correct PPE minimum of gloves and
overalls.
be
Page 19