Table of Contents
Advertisement
Cable
Length
Selects the length of battery-charger DC cable from 1 m to 11 m.
Section
Defines the battery-charger DC cable cross-section. Select one section
over the list of values (10, 16, 25, 35, 50, 70, 95 or 120 mm²).
Network (Option)
Sets the protocol and configuration for the connection of the charger to
a network, type Ethernet or series.
Option
Options test
Carries out a test of correct functionality of the options - managing the
pump, electro-valve and remote display green/red during 30 seconds.
Electrovalve time
Defines the opening time (between 15 and 300 seconds – ionic
profile – pneumatic, PzM (Water Less
the electro-valve for the automatic water refilling of the batteries.
Reset Memo/status
To reset the memorizations and status recorded by the charger.
PARAMETERS
Date/Time
Sets date and time of the charger. The charger doesn't manage
summer/winter time changes.
Language
Selects the language displayed in the menus.
Region
Selects the format for date, metric/imperial units for temperature and
length.
Contrast
Modifies the display contrast level.
Change Password
Changes the password.
PASSWORD
Manages a password to limit access to charger menu..
INFORMATION
Gives information on the software version, memory and time clock.
®
) WL20 (Water Less
®
20) of
USING THE CHARGER
UNPACKING
The charger is delivered with the following:
•
2m AC mains cable.
•
3m DC battery cable.
•
This technical manual.
MECHANICAL INSTALLATION
The charger must be mounted in a vertical position. For wall mounted
chargers, the bottom of the charger must be at least 0.60 m from the
floor and/or the charger below and the top of the unit at least 1.0 m from
the ceiling. The minimum distance between two adjacent chargers must
be 0.30 m.
See paragraph Recommendations and avoid areas where the chargers
may be splashed with water, or saline environments.
The charger is held by 4 x M6 or M10 screws suitable for the type of sup-
port. The drilling pattern is depending on the charger model. See illustra-
tion below.
Standard charger model 2 - Fixing L x H: 120 x 470 mm
Charger model 2 with optional pump - Fixing L x H: 304 x 355 mm
6
Hide quick links:
Advertisement
Table of Contents
