Electrical Connections - Hawker Life IQ Technical Manual

Standard charger model D - Fixing L x H: 470 x 350 mm
Standard charger model D with optional pump -
Fixing L x H: 470 x 350 mm
Standard charger model E - Fixing L x H: 470 x 350 mm
Standard charger model E with optional pump -
Fixing L x H: 470 x 350 mm

ELECTRICAL CONNECTIONS

Single phase and 3-phase input
Connection to the mains supply will be 230V AC single phase or 400V AC
3-phase and must be connected using a suitable plug and adequately
sized circuit breaker (not included). Current requirements in Amps are
indicated on the charger information plate.
Battery output
It is essential to ensure correct polarity. However, reversed polarity will
result in blowing the output fuse, inability to charge and the fault code
DF2 to be displayed. See Fault Code s.
Connection to the battery should be done using the cables supplied:
• RED cable: battery POSITIVE.
• BLACK cable: battery NEGATIVE.
7