Table of Contents
Advertisement
b. Dual Timer Dryers
1) To start the dryer:
a) Microprocessor controller (computer) dryers
(1) The light emitting diode (L.E.D.) display will read "FILL."
(2) Press the "E" on the keyboard (touch pad).
(3) The L.E.D. display will quickly show "Ld30," "LC04," "F180." The dryer will start, and the
L.E.D. display will show "dr30."
b) Dual timer dryers
(1) Turn drying timer knob for a time of 20 minutes.
(2) Select "High Temp."
(3) Push "Push To Start" switch.
(4) To stop dryer, open the main door.
2) Spin and stop times are adjustable at the reversing timer.
The basket (tumbler) is treated with a protective coating. We suggest dampening old garments or cloth
material with a solution of water and nonflammable mild detergent and tumbling them in the basket (tumbler) to
remove this coating.
8. Each dryer should be operated through one (1) complete cycle to assure that no further adjustments are
necessary and that ALL components are functioning properly.
9. Make a complete operational check of ALL operating controls.
a. Microprocessor controller (computer) programs and selections...
1) Each microprocessor controller (computer) has been preprogrammed by the factory with the most
commonly used parameter (program) selections. If computer program changes are required, refer
to the computer programming manual, which was shipped with the dryer.
b. Dual timer dryers check...
1) Heating Timer
2) Cool Down Timer
3) Temperature Selection Switch
BASKET COATING
36
Advertisement
Table of Contents
