Table of Contents
Advertisement
2. Electrical Service Specifications
CG145-55 (Gas and Steam)
ELECTRIC SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC and 230/240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.
NOTES: A. Fuse ratings are dual element, time delay, current limiting, class RK1 or RK5 ONLY.
B. Circuit breakers are thermal/magnetic (industrial) motor curve type ONLY. For others, calculate/verify correct
breaker size according to appliance amp draw rating and type of breaker used.
C. Circuit breakers for 3-phase (3ø) dryers must be 3-pole type.
SERVICE
PHASE
VOLTAGE
208
3ø
240
3ø
380
3ø
416
3ø
460
3ø
480
3ø
*
AWG Stranded Wire Type...size wire as per National Electrical Code or local codes.
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the left side panel area behind the top control (access) door (refer to the
illustration in Section VII). In the case of 208 VAC or 230/240 VAC, the supply
voltage must match the electric service specifications of the data label exactly.
WARNING: 208 VAC and 230/240 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice or
obligation.
APPROX.
WIRE
AMP DRAW
SERVICE
60 Hz
3
17
3
17
3/4
---
3/4
---
3/4
9
3/4
9
22
MINIMUM
WIRE SIZE
50 Hz
20
*
---
*
11
*
*
10
*
---
*
---
FUSING
CIRCUIT
BREAKER
Dual Element
Time Delay
35
35
35
35
20
20
15
20
15
15
15
15
Advertisement
Table of Contents
