Installation
4
Connecting the safety switch
.08
4
Checking the start inhibitor function
.09
● Switch the machine on at the main switch and tilt back the sewing head.
● The error message "Err: 9" must appear on the control panel.
● If the message does not appear, check the setting of safety switch 2.
● After the sewing head has been returned to the upright position, the machine is ready for
20
2
1
Fig. 4 - 08
operation again.
● Connect plug 1 of safety switch 2 as
shown in Fig. 4 - 08.
When the machine head is
tilted back,the safety switch
prevents the machine from star-
ting when the main switch is
on.