Assembling The Thread Guide And Take-Up Lever Guard - Pfaff powerLine 2595 Setup Instructions

Installation
4

Assembling the thread guide and take-up lever guard

.12
3
2
3
5
4
10
6
1
8
7
9
11
Fig. 4 - 12
● Remove face plate 1 and arm cover 2 (screws 3).
● Adjust thread guide 4 (screw 5) as shown in Fig. 4 - 12.
● Insert thread guide 6 in hole 7, and fasten with nut 8 from below.
● Attach take-up lever guard 9 with bolts 10 (M4 x 10) and nuts 11 to arm cover 2.
Leave face plate and arm cover unscrewed for the next assembly steps.
23