Advertisement
'- -
+ < !
8.11 AT^SMONI
The
command supplies information of the serving cell.
AT^SMONI
Syntax
Test Command
AT^SMONI=?
Response(s)
OK
Exec Command
AT^SMONI
Response(s)
See: Section 8.11.1,
OK
Write Command
Response(s)
Last
PIN
- -
-
Notes
The parameters LAC and cell are presented as hexadecimal digits, the remaining parameters are
•
composed of decimal digits.
If the BS supports frequency hopping during a connection, the dedicated channel (ARFCN) is
•
not stable. This mode is indicated by chann = 'h'.
It may happen for a short time that following parameters have no values after an inter-system
•
change from GSM to UMTS: EC/n0, RSCP, SQual and SRxLev. In this case these parameter
values are displayed with the '-' character.
The service state 'SEARCH' (Searching) could mean a PLMN search or a cell search. This can
•
also happen for a short time when ME is leaving connected mode.
102
&
H ,
H
Monitoring Serving Cell
AT^SMONI Responses
+ 5< -
$
! "
"
# $
Advertisement
