Functions; Menu; Steam Functions; Meat Cooking (Automatically) - Technika T45SOG Instructions For Use And Installation

the water tank. Then remove the water tank to add water.
8、FUNCTIONS

8.1 Menu

Under standby state, presses PT2 to boot function choose, turn PT2 to choose function. The
chosen function will be shown on DSP3.Preset temperature and parameter will be shown on
DSP2.
Note ：1、When the cavity temperature reaches the preset temperature, temperature icon"
will stop flashing and become light.
2、Press PT1, PT2 at the same time during working process, current cavity temperature
will be shown on DSP2.

8.2 Steam Functions

Under standby state, press PT2 boot option, rotate PT2 selected steam function "
display default time 10 minutes, DSP2 display default steam temperature 100℃.
Press PT1, rotate PT1 to set temperature.
Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2, the
appliance begins to work. Steam function icon"
working time icon"
Temperature range: 40-100 ℃
The longest working time: 90:00

8.3 Meat cooking (Automatically)

Choose steamed meat function"
default steam temperature is 100 ℃ and program C1 shine alternately
Press PT1, rotate PT1 set procedures
Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2, the
appliance begins to work. Steam meat function icon "
working time icon"
Notice: Temperature of foods will flash alternately.
Different meats have different temperature; you can refer to the following table.
Program Type of meat
C1 Chicken Breast
C2 Smoked Pork Loin
C3 Turkey Escalope
C4 Pork Filet Whole
C5 Vienna Sausages

8.4 Fish cooking (Automatically)

Choose steamed fish function"
steam temperature is 80 ℃ and program b1 shine alternately
Press PT1, rotate PT1 set procedures.
Press PT1 again and turn PT1 to set cooking time. After cooking time is set, Press PT2, the
appliance begins to work. Steam fish function icon "
working time icon"
"and high water level icon"
",DSP1 display default time 30:00 minutes, DSP2
"and high water level icon"
Temperature
（℃）
100
100
100
100
90
",DSP1 display default time 25:00 minutes, DSP2 default
"and high water level icon"
"and temperature icon"
"will light.
" and temperature icon "
"will light.
Time（min） Container
30 Perforated
45 Perforated
20 Perforated
25 Perforated
15 Perforated
" and temperature icon "
"will light.
"
" DSP1
"will flash,
" will flash,
Level
2
2
2
2
2
" will flash,
11