Oki OKIPAGE6w Troubleshooting Manual page 28

B-7 Data sent through the Parallel I/F cannot be received.
• Is the signal at Pin 11 (BUSY-P) of CN4 being at low level?
• No
• Yes
• Yes Is the level of the signal at Pin 1 (STB-N) of CN4 changed at data reception?
• No
• Yes Are the signals at Pin 1 (ACK-N), Pin 9 (FAULT-N) of IC7 (74LS07) being
respectively at low level and high level in on-line mode?
• No
• OK?
• No
• Yes Failure of IC6
Is the signal at Pin 13 (BUSY-P) of IC7 (74LS07) changed as shown
below, at data reception?
BUSY-P
• No Failure of IC6
Replace IC7 (74LS07).
Make sure of the connection of I/F cable or the operation of the h ost
computer.
Replace IC7 (74LS07).
- 26 -
ON-LINE OFF-LINE
Low High