Samsung SR8875 Quick Start Manual page 2

Cleaning the robotic vacuum cleaner
Cleaning the Dust Bin
and the Filter
▶ When separating
1. When dust has accumulated inside
the dust bin.
2. When the suction power suddenly
becomes weak.
3. When the noise suddenly increases.
3
Separate the filter from the
dust bin by pulling it in the
direction of the arrow in the
figure.
Cleaning the robotic vacuum
cleaner
▶ Must turn off the
Power Switch at
the bottom of the
main unit before
cleaning the
robotic vacuum.
Because the dust in the dust bin may
come out, separate the dust bin first
before cleaning the power brush.
4
Remove any foreign substances such
as long hairs or strings wrapped
around the power brush using a
cleaning brush or a vacuum cleaner.
Installing the charger
▶ Install the charger on a flat surface.
English
DJ68-00674N-1 EN.indd 2 DJ68-00674N-1 EN.indd 2
1
the dust bin, take
care not to spill
the dust out of the
dust bin. Empty
the dust bin in the
following cases.
Press the Dust Bin Eject (PUSH)
button and pull the dust bin to
separate the dust bin.
4
Wipe the dust from the filter
and the dust bin.
(You can wash them with
water.)
1
Separate the dust bin
by pressing the Dust
Bin Eject (PUSH) button.
5
When cleaning is complete, fix the Power
Switch side of the power brush first and
then fix the other side of the brush in the
same way.
Install the charger in the following location.
▶ There should be no obstacles 0.5m
to the left and right and within 1m of
the front.
2
Separate the dust bin cover by pulling it
in the direction of the arrow in the
figure.
5
Install the filter into the dust
bin. (Make sure that the grid
pattern of the filter is facing
downwards. It cannot be
installed in the wrong direction.)
2
After checking whether
there are any foreign
substances, press the
hook that is fixing the
brush cover to separate it.
6
After inserting the 3 tips at the top of
the cover, push the other end in until it
"clicks" into place.
▶ Install the charger in a location
where it can be easily accessed by
the robotic vacuum cleaner.
6
Close the dust bin cover
and install it into the main
unit.
3
Lift the power brush up
from the main unit.
13. 01. 09 오후 8:14 13. 01. 09 오후 8:14