Tail Lamps - BMW 2013 X1 Owner's Manual

Turn signals, front
21-watt bulb, PY21W
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Open the folding cover in the wheel arch,
refer to page 251.
3. Turn the turn signal bulb socket 1 to the
left and remove it.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
5. Insert the turn signal bulb socket 1 and
turn it all the way to the right.
6. Attach the folding cover in the wheel arch.
Turn signal in exterior mirror
Follow the general instructions on lamps and
bulbs, refer to page 250.
The turn signals in the exterior mirrors use
LED technology.
Contact your service center in the event of a
malfunction.

Tail lamps

The tail lamps consist of two parts. One part is
in the tailgate and the other is in the fender.
P21W bulbs, 21 watt
Online Edition for Part no. 01 40 2 911 269 - VI/13
Replacing components
1 Backup lamp
2 Roadside parking lamp/tail lamp LED
3 Brake lamp
4 Turn signal
5 Inner brake lamp
If bulb 2 is defective, please contact the serv‐
ice center.
Lamps in fender
All bulbs are integrated in a central bulb holder.
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Press the cover out of the rear cargo area
side trim and remove it.
3. Disengage the bulb holder by pressing
down the upper clip, arrow 1.
Mobility
253