Destination Entry - BMW 2013 X1 Owner's Manual

Navigation

Destination entry

Vehicle equipment
This chapter describes all series equipment as
well as country-specific and special equipment
offered for this model series.Therefore, it also
describes equipment that may not be found in
your vehicle, for instance due to the selected
special equipment or the country version. This
also applies to safety-related functions and
systems.
At a glance
In entering your destination you can select
from the following options:
▷ Enter the destination manually, see below.
▷ Select the destination from the address
book, refer to page 146.
▷ Last destinations, refer to page 147.
▷ Special destinations, refer to page 147.
▷ Destination entry via map, refer to
page 149.
▷ Using the home address as the destina‐
tion, refer to page 147.
▷ Destination entry by voice, refer to
page 150.
▷ Destination entry via the Concierge serv‐
ice, refer to page 149.
You can also store a navigation destination on
the programmable memory buttons, refer to
page 22.
Entries in stationary vehicle
Enter data only when the vehicle is sta‐
tionary, and always give priority to the applica‐
ble traffic regulations in the event of any con‐
tradiction between traffic and road conditions
and the instructions issued by the navigation
system. Failure to take to this precaution can
144
Destination entry
Online Edition for Part no. 01 40 2 911 269 - VI/13
place you in violation of the law and put vehicle
occupants and other road users in danger.◀
Manual destination entry
General information
The system supports you in entering street
names and house numbers by automatically
completing the entry and providing entry com‐
parisons, refer to page 23.
Stored town/city and street names can be
called up quickly.
▷ If the existing entries should not be
changed, the entries for the state/province
and town/city can be skipped.
▷ Destination guidance is started to the
town/city center if no street is entered.
Entering a state/province
1. Press the button.
2. "Navigation"
3. "Enter address"
4. Select "State/Province" or the displayed
state/province.