BMW 2013 X1 Owner's Manual page 120

Controls
▷ Installation behind the front seats, ar‐
rows 1.
▷ Installation behind the rear seats, arrows 2.
Label
Ensure that the partition net is correctly posi‐
tioned, i.e., do not reverse front and back.
The partition net is labeled accordingly.
Installation behind the rear seats
1. If necessary, tilt the rear seat backrests for‐
ward and remove the front cargo cover, re‐
fer to page 118.
2. Fold open the cover caps 1 of the rear
brackets in the headliner to the point
where they engage.
3. Insert the rods of the partition net 2 all the
way into the holders on both sides and
slide forward.
120
Interior equipment
Online Edition for Part no. 01 40 2 911 269 - VI/13
4. Attach the hooks 1 at the bottom of the re‐
taining straps into the eyelets on the rear
seat backrest, arrow, on both sides.
5. Lash the partition net tightly. To do this,
tighten the retaining straps using the ten‐
sioning buckles.
Installation behind the front seats
1. Fold down the rear seat backrests, refer to
Enlarging the cargo area.
2. Fold open the cover caps of the front
brackets in the headliner to the point
where they engage.
3. Insert the rods of the partition net all the
way into the holders on both sides and
slide forward.
4. Attach the hooks at the bottom of the re‐
taining straps into the upper eyelets on the
rear seat backrest on both sides.
5. Lash the partition net tightly. To do this,
tighten the retaining straps using the ten‐
sioning buckles.