Tail Lamps - BMW 2014 X1 Owner's Manual

Adhere to the general instructions, refer to
page 248.
With Xenon headlamps, the following lamps
are designed with LED technology:
▷ Parking and roadside parking lamps.
▷ Daytime running lights.
Contact your service center in the event of a
malfunction.
Parking lamps and roadside parking
lamps, daytime running lights
H8 bulb, 35 watt
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Remove the high beam cover, refer to
page 249.
3. Turn the bulb by approx. 90˚, see arrow,
and pull it out.
4. Disconnect the plug, change the bulb and
reconnect the plug.
5. Insert the bulb and turn it until it stops.
6. Reattach the cover.
I n f o r ma t i o n P r o v i d e d b y :
Online Edition for Part no. 01 40 2 957 353 - X/14
Replacing components
Turn signals, front
21-watt bulb, PY21W
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Open the folding cover in the wheel arch,
refer to page 249.
3. Turn the turn signal bulb socket 1 to the
left and remove it.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
5. Insert the turn signal bulb socket 1 and
turn it all the way to the right.
6. Attach the folding cover in the wheel arch.
Turn signal in exterior mirror
Follow the general instructions on lamps and
bulbs, refer to page 248.
Contact your service center in the event of a
malfunction.

Tail lamps

The tail lamps consist of two parts. One part is
in the tailgate and the other is in the fender.
P21W bulbs, 21 watt
Mobility
251