Changing Wheels - BMW 2013 X1 Owner's Manual

Mobility
On the right side, take the button with the
fuel pump symbol out of the holder toward
the front if necessary.
4. Squeeze the lower clips, arrows 2, and take
out the bulb holder.
5. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
6. Re-engage the bulb holder so that it audi‐
bly clicks into place.
7. Replace the cover.
Inside brake lamps in the tailgate
1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Take the warning triangle out of the
bracket, refer to page 258.
3. Release the screws of the tailgate panel,
arrows.
4. Unclip the tailgate panel by pulling it down‐
ward.
5. Push out the handle for opening manually
in the event of an electrical malfunction, re‐
fer to page 36, insert it through the open‐
ing, and take off the panel.
254
Replacing components
Online Edition for Part no. 01 40 2 911 269 - VI/13
6. Release the bulb holder with the clip, see
arrows, and remove it.
7. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
8. Re-engage the bulb holder so that it audi‐
bly clicks into place.
9. Insert the handle for opening manually
through the tailgate panel opening and
press it in.
10. Reattach the tailgate panel.
License plate lamp, center brake lamp,
and roadside parking lamp/tail lamp
These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.

Changing wheels

Notes
Your vehicle is equipped with run-flat tires, re‐
fer to page 240, as standard equipment.
They do not need to be replaced immediately
in the event of a puncture.
No spare tire is available in the case of a flat
tire.
When mounting new tires or changing from
summer to winter tires or vice versa, use run-
flat tires for your own safety.
Suitable tools for changing the wheels are
available from the service center as an acces‐
sory.