Troubleshooting
Problem
The
indicator lights even when a
paper jam has not occurred.
The machine repeats the master-
making process for each original.
The
key blinks.
"
"appears on the Print
Quantity Display and the machine
does not start.
96
Troubleshooting Tips
Riso Kagaku Technical Training Center Version
Cause
Lifted paper was ejected at the time
of the second rotation of the Print
Cylinder(Drum).
Because sunlight was projected to
the machine, the sensor did not
function correctly.
"Collate Copies" or "Collate" was
selected for printer driver settings for
the received document data.
Received data is waiting for output.
When the machine is in use, the
power was turned off.
Action
Check the printed copies, and if the
top margin is less than
/
3
16
slightly lower the print position.
Use a curtain for example to shut out
sunlight or move the machine to a
place free from direct sunlight.
Cancel the current print job and
resend the document data without
"Collate Copies" or "Collate"
selected for the printer driver
settings.
Press the
key to output the data.
To delete data waiting for output,
press the
key.
Press the
key.
"(5 mm),