Riso RZ390UI User Manual page 87

When the indicator blinks
Check error locations and error numbers (Error Number Display) and take the following procedures.
If an error number is not shown, press the [
Location Error No.
No.
c-04
1
F-03
2 d-11
d-01
d-02
d-03
3
d-04
Riso Kagaku Technical Training Center Version
] key.
Cause
The tray has run out of paper.
Custom-size paper has been placed
on the Paper Feed Tray at the time of
2-Up printing.
The Front Cover is open or has not
been completely closed.
The Print Cylinder(Drum) has not been
set or has not been correctly set.
An inappropriate Print Cylinder(Drum)
has been set.
The Ink Cartridge has not been set or
has not been correctly set.
An inappropriate Ink Cartridge has
been set.
The label on the Ink Cartridge outlet
surface has come off or surface is with
dirt.
Action
Place paper on the Paper Feed Tray.
Custom-size paper does not allow 2-Up
printing.
Press the key and then place regular-
sized paper.
Close the Front Cover completely.
Set the Print Cylinder(Drum) correctly.
p.73
Set an appropriate Print Cylinder(Drum).
p.73
Important!:
• Use a Print Cylinder(Drum) specific to the
machine. Set other cylinders(drums) can
result in malfunction or any other troubles.
Set an Ink Cartridge correctly.
p.66
Set an Ink Cartridge specific to the machine.
p.66
Important!:
• Use an Ink Cartridge specific to the
machine.
Using other Ink Cartridges can result in
malfunction or any other troubles.
The label on the Ink Cartridge outlet surface
contains information needed for printing. If the
machine cannot read the information, it does
not operate.
Set an Ink Cartridge that is specific to the
machine and that is with label attachment and
free from dirt.
Check & Error Display
Troubleshooting
85