Exhaust Duct Upper; Divide Plate L; Divide Plate R; Rear Spacer Qty - Viking VCSO210 Installation Manual

Installation
5
FIGURE 5-A
RECTIFIER PLATE L
4 SCREwS (A)
FIGURE 5-B
REAR SPACER

SCREw (A)

SCREw (A)
SCREw (A)
EXHAUST DUCT BACK
STEP 5: INSTALLATION OF REAR SPACER AND EXHAUST DUCT
UPPER
5.1 Attach RECTIFIER PLATE L to inside of EXHAUST DUCT UPPER
with 4 SCREwS (A) as shown in Figure 5-A.
5.2 Place EXHAUST DUCT UPPER over the oven and EXHAUST DUCT
BACK, and attach REAR SPACER with 2 SCREwS (A) in Figure
5-B.
5.3 Tighten together EXHAUST DUCT UPPER and EXHAUST DUCT
BACK at the left and right sides with 2 SCREwS (A) as shown in
Figure 5-B.

EXHAUST DUCT UPPER

SCREw (A)
6
EXHAUST DUCT UPPER
STEP 6: INSTALLATION OF EXHAUST DUCT LEFT
6.1 Attach EXHAUST DUCT LEFT to the left wall of the oven.
6.2 Tighten with 6 screws (A) as shown in Figure 6.
EXHAUST DUCT UPPER
7

DIVIDE PLATE R

STEP 7: INSTALLATION OF EXHAUST DUCT RIGHT
7.1 Attach EXHAUST DUCT RIGHT to the right wall of the oven.
7.2 Tighten with 4 screws (A) as shown in Figure 7.
6
4 SCREwS (A)

EXHAUST

DUCT LEFT

2 SCREwS (A)

DIVIDE PLATE L

2 SCREwS (A)
EXHAUST

DUCT RIGHT

2 SCREwS (A)
E