Exhaust Duct Back - Viking VCSO210SS Installation Manual

Installation
3
EXHAUST DUCT
BOTTOM
FIGURE 3-A
STEP 3: EXHAUST DUCT BOTTOM INSTALLATION
Place the oven onto the EXHAUST DUCT BOTTOM, lowering the 4
feet of the oven onto the projections at the 4 corners of EXHAUST
DUCT BOTTOM as shown in Figure 3-A.
SCREw (A)
4
#1
#1
STEP 4: EXHAUST DUCT BACK INSTALLATION
4.1 Remove 2 screws (#1) from upper both sides of the oven as shown
in Figure 4-A to install the EXHAUST DUCT BACk. (Save 2 screws
to be used at step 4.2.)
4.2 Secure EXHAUST DUCT BACk to the oven with the screws (#1)
removed at step 4.1 and a SCREw (A) as shown in Figure 4-B.
E5
FIGURE 4 -A
FIGURE 4 -B

EXHAUST DUCT BACk

SCREw (A)