Makita BTD200 Instruction Manual page 11

Reversing switch action
CAUTION
Always check the direction of rotation before operation
Use the reversing switch only after the tool comes to
a
complete stop Changing the
When not operating the tool, always set the reversing switch lever to the neutral posi-
direction of rotation before the tool stops may damage the tool
tion.
This tool has
a
reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the
A
side for
clockwise rotation or from the B side for
counterclockwise rotation. When the
switch lever
is
in the neutral position, the
switch trigger cannot be pulled.
Speed
change
To change the speed, first switch off the
tool and then slide the speed change lever
to the
"A"
side
(2) for
high speed or
"B"
side (1) for low speed. Be sure that the
speed change lever is set to the correct
position before operation. Use the right
speed for your job.
Reversing switch lever
Clockwise Counterclockwise
L
CAUTION:
*Always set the speed change lever fully to the correct position. If you operate the
tool
with the speed change lever positioned half-way between the " A " side
(2)
and
" 6 "
side
(11, the tool may be damaged.
DO not use the speed change lever while the tool is running. The
tool
may be damaged.
11