Interference Eliminator Code; Keypad Tones; Scan - Motorola XTL446 User Manual

Portable two-way radio
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
6864225V01_O_EN.fm Page 12 Thursday, September 16, 2004 3:50 PM
Simple Menu Mode
Simple Menu mode allows you to limit the number of
menus displayed (Channel, Code and call tones) to
allow for simpler radio operation.
1.To enable Simple Menu mode press
on the radio. The radio chirps and the display tempo-
rarily displays only 6 images.
2.To turn off Simple Menu mode press
turn on the radio.
Selecting a Radio Channel
H
1.Press
. The channel number will begin to flash.
D
l
2.Use
or
to change channel.
G
3.Briefly press
to set new channel or press and
H
hold
for 3 seconds to exit menu.

Interference Eliminator Code

Interference eliminator codes help minimize
interference by providing you with a choice of code
combinations.You can specify a different code for each
channel.
H
1.Press
until the code number begins to flash.
D
l
2.Use
or
to change the code.To hear every-
one on your channel, select code 0.
G
3.Press
to set new code.
You can specify a different code for each channel:
1.To set a channel and code combination, press
12
D
and then press
H
2.Press
again and then press
select a code.
H
as you turn
G
3.Press
or press and hold
and to save the channel and code combination.
H
as you

Keypad Tones

Every time you press a button on your radio, it beeps
unless you turn this function off. Your radio is
programmed at the factory with keypad tones turned
on.
1.To disable the tones, hold down
on your radio. When you press any button on the
keypad you will no longer hear the tone.
2.To enable tones, hold down
your radio.

Scan

Use this facility to monitor other transmitting radios. It
allows you to listen and talk back without having to
change channels.
1.To start scanning, briefly press
tor h will be displayed and the radio scrolls through
available channels. When the radio detects activity, it
stops on that channel and displays the channel num-
ber and code.
H
l
or
to select the channel.
D
l
or
to
H
to exit the menu
l
while switching
l
while switching on
J
. The scan indica-

Advertisement

Table of Contents
loading

Table of Contents