Turning On Scan - Motorola ASTRO XTL 5000 User Manual

Turning On Scan

Do the following:
1 Press the
2 Press the
The Scan indicator lights and a list of modes is scanned
for activity. The text display area will indicate SCAN ON if
scan is currently enabled or SCAN OFF if scan is just
been turned off.
When a scanned mode becomes active, the display
changes to show the active mode name, the appropriate
priority indicator lights, and the radio unmutes.
The radio will not begin scanning again for a
predetermined hang time after the call ends, giving you
time to respond. The hang time is typically three
seconds (by default), but can be changed by a qualified
radio technician.
Note: A lit N PRI (non-priority) indicator means that the active
mode is a non-priority member of the scan list (for all scan
types).
A solidly-lit PRI (priority) indicator means that the active
mode is the priority 2 member of the scan list (Trunking
Priority Monitor and Conventional scan types only).
A blinking PRI indicator means that the active mode is the
priority 1 member of the scan list (Trunking Priority Monitor
and Conventional scan types only).
ASTRO XTL 5000 Digital Mobile Radio with O5 Control Head
button to scroll to the SCAN softkey.
button below SCAN.
General Radio Features
37