Multiple Control Head Features
Intercom feature
The intercom feature allows a user at one control head to talk to the
user at the other control heads of a Multiple Control Head
configuration. This feature only applies to control heads in the All
Active mode.
Using the Intercom feature
1
Press the
intercom feature.
Note: You can activate the
intercom feature on
any attached control
head.
2
Press the
intercom feature.
OR
Press the HOME button on any control head to deactivate the
intercom feature.
Note: The intercom feature also deactivates when user initiates
a mode change. If the radio is on an emergency channel,
pressing of the EMERGENCY button or the emergency
footswitch button on any control head also deactivates
the intercom feature.
20
button directly below INTC to activate the
INTC
button directly below EXIT to deactivate the
Radio 1
ZONE
PAGE
CALL
INTERCOM
IDLE
EXIT