Multiple Control Head Features
One Active Mode
The One Active mode enables only one control head to be visibly
active at a time in a two control head system. The active control head
commands the system normally while the inactive control head
displays REMOTE. Command can be changed between the two control
heads at any time by pressing the F/R (Front/Rear) button. The
Volume knob, DIM, F/R, and emergency (if programmed) buttons
remain active on the inactive head, while all other controls are
disabled. Emergency footswitch and VIP inputs are also still active on
the inactive control head, however VIP inputs must be connected to
the head assigned ID # 1. See "Setting the Initial Control Head's ID"
on page 16 for further information.
Note: Only two control heads are supported in the one active
mode.
Radio
Z1
ZONE CHAN
PWR
SQL
Active Control Head
REMOTE
F/R
Inactive Control Head
18