Removing And Carrying The Outboard Motor; Removing The Outboard Motor; Carrying The Outboard Motor - TOHATSU M 2.5A2 Owner's Manual

30

REMOVING AND CARRYING THE OUTBOARD MOTOR

1. Removing the outboard motor

1 Stop the engine.
2 Close the fuel cock and air vent
screw.
3 Remove the outboard motor from
boat and completely drain the
water from the gear case.
!
Engine may be hot immediately after
operating and could cause burns if
touched. Allow Engine to cool down
before attempting to carry the outboard.
6
�������

2. Carrying the outboard motor

Keep the outboard motor in a vertical
position when carrying.
�������
!
Close air vent screw of fuel tank and
fuel cock before carrying or storing
outboard motor and fuel tank, or fuel
may leak, potentially catching fire.