Updating The Workstation; Updating The Workstation After First Boot; Updating The Bios; Determining The Current Bios Version - HP Z440 User Manual

8

Updating the workstation

●

Updating the workstation after first boot

●

Updating the BIOS

● Upgrading device drivers
HP is constantly working on improving your total workstation experience. To ensure that the workstation
leverages the latest enhancements, HP recommends that you install the latest BIOS, driver, and software
updates on a regular basis.
Updating the workstation after first boot
After successfully booting the workstation for the first time, follow these guidelines to be sure that the
workstation is up-to-date:
● Be sure that you have the latest system BIOS version loaded. See
● Be sure that you have the latest drivers for your system. See
● Become familiar with your available HP resources.
●
Consider a subscription to Driver Alerts at http://www.hp.com/go/subscriberschoice.
Updating the BIOS
For optimum performance, determine the BIOS version on the workstation, and upgrade it if necessary.

Determining the current BIOS version

To determine the current BIOS version:
1. Press Esc
2. Press F10
3. Select File > System Information. Note the workstation BIOS version.
NOTE:
the Maintenance and Service Guide at http://www.hp.com/support/workstation_manuals.
during startup (boot).
to enter the F10 Setup utility.
For procedures for upgrading the BIOS as well as the F10 Setup utility BIOS Menu settings, see
Updating the BIOS on page
Upgrading device drivers on page
Updating the workstation after first boot
49.
50.
49