Sony BDP-S2200 Operating Instructions Manual page 34

, Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for
HDMI] function.
– the connected component's setting
for the [Control for HDMI] function
is correct.
, When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the AC adaptor, or a
power failure occurs, try the
following:
selector of the AV amplifier
(receiver) so that the picture from
the player appears on the TV screen.
Set [Control for HDMI] in
2
[HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI
Settings] to [On] (page 28). Refer to
the instruction manual supplied
with the AV amplifier (receiver).
The System Power-Off function does
not work (BRAVIA Sync).
, Check that [Control for HDMI] and
[Linked to TV-off] in [HDMI Settings]
are set to [On] (page 28).
Others
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
beginning].
34
Switch the input
1
Playback does not start from the
resume point where you last stopped
playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
Message Code 1 [Playback stopped.
The content being played is protected
by Cinavia and is not authorized for
playback on this device. For more
information, see http://
www.cinavia.com. Message Code 1]
appears on the screen when playing a
disc.
, The audio track of the video that you
are playing contains a Cinavia code
indicating it was intended for
presentation using professional
equipment only and is not authorized
for playback by consumers (page 5).
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following:
off, and disconnect the AC adaptor.
Reconnect the AC adaptor while
2
pressing down Z on the player.
Keep pressing down Z on the player
3
until the tray opens.
disc.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
Turn the player
1
Remove the
4