Before Use - Panasonic MJ-L500 Operating Instructions Manual

Before Use

Disassembling/Assembling attachments
● The following steps show how to disassemble/assemble attachments, using the juice attachment as
an example.
The frozen attachment can be disassembled/assembled in the same method.
To disassemble
1
Remove the
from the motor
2
Remove the juice
● The squeezing screw comes out with it.
Squeezing
screw
( Frozen
attachment
3
Filter
( Frozen
attachment
Rotating
brush
EN10
1
● The gasket is located in the juicing bowl.
Top view
● The rubber plug is located on the outer
bottom.
Push it in until
)
no gap.
Outer bottom view
● Rubber brushes are located on side of the
rotating brush.
See page EN17 for how to install the gasket,
rubber plug and rubber brushes.
)
● The juicer may not work properly if
they are not assembled correctly.
To assemble
2
U
Align the " " mark on the motor housing and
V
the " " on the juicing bowl.
3
U
Align the " " mark on the motor housing and
T
the " " mark on the juice attachment.
Top view
4
1 Insert the squeezing screw into the center.
2 Rotate the squeezing screw and push it into
the hole until it stops.
● The lid cannot be closed if the squeezing
screw is not pushed down sufficiently.
● Be careful not to get your finger clamped in
the gap between the squeezing screw and
the filter.
CAUTION: Be sure the appliance is unplugged.
( Frozen )
attachment
① ●
② ●
EN11