Communication Settings - Canon WUX6010 User Manual

HDBaseT
Enable or disable HDBaseT. Refer to the following sections for details on HDBaseT
connections. For video/audio details, see "Connection Procedure" (P50, P51). For network
details, see "Connection Methods" (P120).
Option
Off Disable HDBaseT.
On Enable HDBaseT.
The HDBaseT input signal value received is indicated by a white line.
Image signal
quality
High
Middle
Low
Do not coil or bundle cables.

Communication settings

Select ports used for serial communication and network connections. Otherwise, you can
refer to this setting to check setting values for the port selected for serial communication.
Submenu
Service port
HDBaseT
Details
Serial
communication
Stop bit
Baud rate
Data bits
Parity
LAN port
Wired network
HDBaseT
• [HDBaseT] is not available when [HDBaseT] (P111) is set to [Off].
• [Wired network] is not available when [Network function] (P124) is set to [Off].
• Changes to the wired network setting do not take effect immediately. To apply [Wired
network] settings, restart the projector.
Indicated by the green portion. This is the recommended
level.
Indicated by the yellow portion. The signal is fluctuating.
Check the cable.
Indicated by the red portion. The signal cannot be used. Fix
the cable connection or replace the cable.
Use the service port (CONTROL).
Use the HDBaseT port.
Option
Length of mark representing the end of data bits.
Modulation rate, in bits per second.
Number of bits of data.
Number of parity bits.
Use the LAN port.
Use the HDBaseT port.
111
Menu Description
Function
Function
Function