Canon WUX6010 User Manual page 136

Menu Description
Setting Basic Information [Network]
From [Network] in the settings screen, you can log into the web screen and set
basic network information. For the setting procedure, refer to "Network Setting"
(P133).
Item
MAC address
DHCP
IP address
Subnet mask
Default gateway
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Explanation
Shows the projector's MAC address.
Select whether to turn the DHCP
function on or off. The following settings
cannot be configured manually when
this setting is [ON], because the IP
address is acquired from the server.
[IP address]
[Subnet mask]
[Default gateway]
Enter the IP address of the projector in
1-byte numbers.
Enter the subnet mask in 1-byte
numbers.
Enter the default gateway IP address in
1-byte numbers.
136
Factory default setting
The MAC address of the
projector
OFF
192.168.254.254
255.255.255.0
0.0.0.0