Golden Eagle ECONOMY SERIES 5040 Owner's Manual page 2

Thank you for purchasing the GoldenPellet Burning Stove, you are now prepared to burn wood in the most effi cient, con-
venient way possible. To achieve the safest, most effi cient and most enjoyable performance from your stove, you must do
three things: 1) Install it properly; 2) Operate it correctly; and 3) Maintain it regularly. The purpose of this manual is to help
you do all three.
PLEASE read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow
these instructions could result in property damage, bodily injury or even death.
Keep this manual handy for future reference.
This stove has been independently tested to ASTM E1509 Standard Specifi cation for Room Heaters, Pellet Fuel Burning
Type 1, and ULC-S627 Standard For Space Heaters For Use With Solid Fuels.
This pellet stove, when installed, must be electrically grounded in accordance with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70.
The authority having jurisdiction (such as municipal building department, fi re department, fi re prevention bureau,
etc.) should be consulted before installation to determine the need to obtain a permit.
This appliance is designed specifi cally for use only with pelletized wood. It is designed for residential installation according
to current national and local building codes as a freestanding room heater. It is also approved as a mobile home heater
which is designed for connection to an outside combustion air source.
The stove will not operate using natural draft or without a power source for the blower systems and fuel feed system and
must not be burned with any type of coal (see PROPER FUEL).
This stove is designed to provide the optimum proportions of fuel and air to the fi re in order to burn free of smoke and soot.
Any blockage of the air supply to or from the stove will seriously degrade its performance and will be evidenced by a smok-
ing exhaust and a sooting window. For best operation the ash content of the pellet fuel should be less than 1% and the
calorifi c value approximately 8200 BTU/LB. Avoid high ash content fuels because this will rapidly fi ll up the burn pot and
eventually cut off the combustion air supply.
Commercial and industrial installations of US Stove Pellet Stoves should not be used since operational control is often not
well managed in these settings.
This manual describes the installation and operation of the Golden Eagle, 5040 wood heater. This heater meets the 2015
U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after May 15, 2015. Under specifi c
test conditions this heater has been shown to deliver heat at rates ranging from 6,569 to 34,785 Btu/hr.
IMPORTANT INFORMATION
Model:__________________________
Style: __________________________
Serial Number: ___________________
Purchase Date:___________________
Purchased From: _________________
INTRODUCTION INTRODUCTION
MAIL YOUR WARRANTY CARD TODAY
To receive full warranty coverage, you will
need to show evidence of the date you pur-
chased your stove. We suggest that you at-
tach your sales invoice to this page, and fi ll in
the form on the left, so that you will have all
the information you need in one place should
the need for service or information occur.