Chrysler Crossfire User Manual page 77

Navigation
Saving a Destination
Select SAVE DESTINATION in the route menu by turning
the right knob and pressing it to confirm.
t·~Ht'lt:.:
HBCDEFeIIIJt<Lt'it·-IOPQRSTUi')lJ::~:~lZ
H
f::iuO-0123456789&',/()-. '" .••
Enter any name of your choice consisting of up to
20 characters for the specified destination. The name
and location are stored in the destination memory by
pressing the right knob until the confirmation beep is
heard.
The destination can also be stored by selecting the
checkmark '" and pressing the right knob.
NOTE: You can store the destination in the destination
memory without a name by pressing and holding the
right knob for more than 2 seconds. You will hear a beep
confirming your entry.
76
The last destination entered can be saved at any
position in the destination memory by turning the right
knob to select the desired location prior to confirming
the selection. Confirm the memory position by pressing
the right knob. The default location is at the beginning·
of the destination memory list.
A total of 20 destinations can be saved.
To complete storing a destination in destination
memory, either start route guidance or enter a new
destination by selecting NEW DESTINATION.