Chrysler Crossfire User Manual page 49

CD Changer Operation
CD CHANGER OPERATION
If a CD changer is connected to the car radio, it is
ready for operation when loaded with a CD magazine
containing at least 1 CD. Close the sliding tray after
loading the magazine to protect the system from dust.
Further operation is performed using the front panel
controls.
Loading/Ejecting the CD Magazine
To remove the CD magazine, open the sliding cover on
the changer and press the eject button on the changer.
The magazine is ejected and can be removed.
When inserting CDs in the magazine, note the arrow
imprint on the magazine so you insert the CDs cor-
rectly.
To allow for the fastest possible change of CDs, CDs
should be loaded in consecutive slots in the magazine,
beginning with tray 1.
48
NOTE: Incorrectly inserted CDs are not played. The dis-
play shows "Bad CD
#"
to indicate which CD is not
working properly.
Playing CDs
Press the CD hardkey to switch between single CD and
CD changer operation. The CD Changer menu is active
if CD Changer was previously active or if there is no
audio CD in the single CD player.
The last CD played resumes from its last position
before the unit was switched off. The display shows
Loading CD X
while the CD is loading. The display
shows the magazine compartment number or the name
assigned to the CD using the OPTION hard key. The
right knob selects discs loaded in the magazine.
II'-'~' ~
coc • ]
~JJ
:=-'._-.
T, '.".
'_i
TP'· , i1-.""-~ •
-- _ ... _ ~,,_~",(;H .
Rnri RPV: > 1<: >1
Pt.') :..