Chrysler Crossfire User Manual page 50

If no CD is loaded in a selected magazine tray, the next
CD
#
appears on the display and the next CD tray
loads.
The next CD automatically plays after the last track of a
CD has finished playing. The CD changer cycles back to
the first CD in the magazine after the last track of the
last CD in the magazine has played.
Refer to the CD instructions earlier in this section
for complete CD player operation instructions.
NOTE: The CD function Rpt is not available when using
the CD changer.
CD Changer Operation
The radio displays "Mech. Err." if a mechanical problem
is detected. Check the CD magazine to make sure it is
properly loaded. If the problem persists, the CD
changer may require service.
OPT BUTTON DURING CD CHANGER MODE
The following display appears when the OPT hardkey is
pressed while the CD Changer is playing.
coc
TrkTtl
i'!a",EcltFil
mil
+
Nam: display CD name instead of track number
mil
+
Edt: enter a name or change an existing name
mil
+
Fil: switch track filter on/off
49